Vehicle and Window LetteringVehicle and Window LetteringReady-to-Apply vinyl (RTA), pre-masked, window and vehicle lettering can be yours for $7* sq. ft. (1-100 sq ft, $25 minimum) per color, and $5 sq. ft. (100+ sq ft).
We can supply you self-sticking, 5-year calendared vinyl, pre-masked for easy application or for customers D.C., northeast Texas, or south Texas one of our experienced employees can install it for you. For installation, please call for a quote, installation costs are $75/hr plus mileage.
If you'd like a full vehicle wrap or graphics for your entire fleet of vehicles please give us a call for pricing. Full wraps start at $1,500 with artwork and installation and can go up to $8,000 on larger vehicles. Please call us for an estimate.
All surfaces must be considered dirty and must be cleaned prior to the application of markings. Recommended cleaning procedures for specific surfaces are listed below.
Saturate a clean, dry, lint-free cloth with isopropyl alcohol or a commercial glass cleaner and wipe the surface.
These surfaces should be cleaned with a solvent such as xylol, naphtha, or lacquer thinner. Dry the surface with a lint-free cloth before the solvent evaporates. Freshly painted surfaces should be dried at least one week prior to application.
Freshly painted surfaces should be dried at least one week prior to application of markings. Clean the area where the markings are to be applied with a household cleaner such as Formula 409® or Fantastik®. Rinse thoroughly and dry.
55°F (13°C) and below 113°F (45°C). If the surface is subject to direct sunlight, apply in the early morning.
 |
 |
|
 |
|
|
Measure and level. Measure to ensure your lettering is properly centered (or off-center if you desire) and use a level to ensure that your letters aren't crooked. Use 1"-2" (2.5-5 cm) strips of masking tape to position. |
|
Apply horizontal tape hinge at the top of the RTA. | |
|
|
|
|
|
|
 |
|
 |
|
|
Remove liner entirely being careful to not let application tape stick to surface before you've squeegeed your lettering into place without bubbles or wrinkles. Work slowly and patiently. A spray bottle of soapy water and a razor blade can be used to correct any mistakes. |
|
Using firm initial squeegee pressure, begin at top center and work down and outward to each edge of mask. | |
|
|
|
|
|
|
 |
|
 |
|
|
Remove application tape at 180° (pull back on itself). | |
Resqueegee your lettering to push bubbles out from under letters. | |
Material: Self-sticking, 5-year calendared vinyl.
Bleed: Depends, please ask.
Color: 4-color process or solid cut vinyl colors.
Production Time: 7 working days after signed proof approval. Rush service available, please inquire for pricing and availability.
Production Method: Cut-vinyl-applique or digital printing. Large volume banners may be screen-printed.
Packaging: Individual.
Shipping Weight: Ask for a shipping quote, but light
Notes: For designs with extremely small letters or great amounts of detail we may charge an additional weeding fee at $75/hr. Please confirm price in advance.
FOB: Arizona, Kansas, or Texas